ETC E-OCC, Руководство по установке

Страница: 7 / 12

Echoflex Installation Guide
Occupancy Sensor
Settings
The Elaho Responsive
Occupancy Sensor
participates in an Elaho
control system using the
configured Space and
Address, which are selectable
using the rotary switches on
the sensor electronics.
DIP switches and the
[MODE] button, also located
on the sensor electronics, set
the sensor functionality and
the occupancy detection
action when set to Basic
configuration mode. See
Configuration on page 9 .
Note:
When the sensor is placed into Custom configuration mode,
DIP switch 2 set to On, all other DIP switch and Mode button settings
are ignored.
Set Space and Address
Two rotary switches on the sensor electronics provide for Space and Address
assignment for the sensor. By default, these switches are set to Space 1,
Address 1. Commands are shared by all devices within a given space.
1. Set the Space rotary switch to the desired number (1 through 16) for
the space you want the sensor to control.
2. Set the Address rotary switch to desired address (1 through 16) for the
sensor identification in the selected space.
Note:
Do not duplicate a device Address within the same Space.
Occupancy Sensor Page 7 of 12 Echoflex