24
Desire D40/D60 XTI v1.8.0 User Manual
Studio Tungsten and Daylight
Plus 7
Adds seven additional color control channels to RGB, HSI, and HSIC input
profile settings. For example HSI with ‘Plus 7’ enabled becomes an 14-
channel profile:
1 – Hue (coarse)
2 - Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – n/a
7 – Plus 7Control on/off
8 –Red
9 – Orange (white if Lustr+)
10 – Amber
11 – Green
12 - Cyan
13 - Blue
14 - Indigo
The desired color and intensity are
achieved by using the HSI or RGB
channels
Placing channel seven at a value over
51% gives the fixture a 14 channel
profile.
Channels 8-14 represent the native
colors of the fixture and allow the
operator to adjust individual color
channels to fine tune the color output.
Strobe
Variable strobe control: 0% is no strobe. The fixture output will strobe more
rapidly as the strobe-channel value approaches 100%.
DMX Profile
DMX
Channels
Channel
Assignments
Notes
Studio
2
1- Intensity
Direct control of each individual color with a
separate master intensity channel. Color calibration
of LEDs is not active in this mode. The ten-channel
profile will produce the highest quality color cross
fades.
2- Strobe
Direct 2
1- Intensity
Effectively addresses all seven colors via three
channels of control. RGB profile will produce
medium quality color cross-fades
2- Strobe
