E T C D e s i r e Q u i c k G u i d e
Desire D22, D40, D40XT, D60 v1.7.0
D22, D40, D40XT, D60 v1.7.0 Quick Guide
Page 6 of 10
Electronic Theatre Controls, Inc.
D60 – Vivid, Lustr+, Fire, Ice, Studio HD
DMX
Profile
DMX
Channels
Channel Assignments
Notes
Direct
10
1 - Red
Direct control of each individual color with a separate
master intensity channel. Color calibration of LEDs is
not active in this mode. The ten-channel profile will
produce the highest quality color cross fades.
2 - Orange
(White if Lustr+)
3 - Amber
4 - Green
5 - Cyan
(3000K white if Studio HD)
6 - Blue
(5000K White if Studio HD)
7 - Indigo
8 - Intensity
9- Strobe
10- Fan Control
RGB
6
(Ch. 4 not
used)
1-Red
Effectively addresses all seven colors via three
channels of control. RGB profile will produce medium
quality color cross-fades
2-Green
3-Blue
4 - n/a
5 - Strobe
6 - Fan Control
HSI
6
1 – Hue (coarse)
High resolution hue (two channels), saturation, and
intensity control.
HSI mode will produce color cross-fades around the
color space.
2 – Hue (fine)
3 - Saturation
4 - Intensity
5 - Strobe
6 - Fan Control
HSIC
7
1 – Hue (coarse)
High-resolution hue, saturation, and intensity control
as above, with the addition of a color point channel to
adjust the color temperature of the fixture in both white
light and color. Color cross-fade performance is the
same as HSI.
2 – Hue (fine)
3 - Saturation
4 - Intensity
5 - Color Point (CCT)
6 - Fan Control
7 - Color Point (CCT)
Studio
6
(Ch. 4 not
used)
1 – Intensity
Controls fixture as a white light unit. If no DMX, i.e.
console input, is present, fixture can be adjusted for
these three parameters on the U/I at the back of the
unit.
2 – Color Point (CCT)
3 - Tint
4 - n/a
5 - Strobe
6 - Fan Control
Additional profile options on following page