ETC ColorSource Spot Pearl v1.7, Руководство по установке

Страница: 16 / 16

ETC Installation Guide
ColorSource Spot Pearl v1.7
Quick Reference
DMX Control Channels
DMX
Channel
ct
(Variable Color Temperature)
dir
(Direct)
1ch
(1 Channel)
1 Intensity Intensity Intensity
2 Color temperature Warm white
3 Cool white
4 Strobe*
*Use DMX values of 0 or 255 for no strobe. Use values of 1–254 to increase the strobe rate
from 1 per second up to 33 per second.
Error Codes
There are three error codes that may be shown on the user interface.
•
CAL
: Screen toggles between
CAL
and
ERR
to indicate a problem with
the color calibration. The fixture will need to be returned to the ETC
factory; contact your local dealer to set up a repair.
•
OtP
: Screen toggles between
OtP
and
ERR
to indicate that the fixture
has gone into over-temperature protection mode to avoid damaging
the fixture. Once the fixture has self-cooled, the error will automatically
clear.
•
No App
: Screen toggles between
no
and
APP
to indicate that the
upgraded fixtures have a software issue. Reload software to clear the
error. If the error persists, contact ETC.
ColorSource Spot Pearl Page 16 of 16 ETC