ETC 989991, Руководство пользователя

Страница: 46 / 56

46
ETC
GB
Features
Fig. 1
1. On/Off switch
2. Sanding sole
3. Sandpaper
4. Scraper
5. Saw blade
6. HSS Segment saw blade
7. Side handle
2. saFeTY insTrUCTiOns
The following pictograms are used in these instructions for use:
Denotes risk of personal injury, loss of life or damage to the tool in case of
non-observance of the instructions in this manual.
Indicateselectricalshockhazard.
special safety instructions
• Compare the maximum number of revolutions allowed of the accessories with the
number of revolutions of the machine.
• When you put the machine away the engine must be switched off and moving parts
must have reached a standstill.
• Never attach an assembly spanner to your machine with a piece of string or anything
similar.
• Do not use sandpaper intended for larger sanding pads. Larger sandpaper will
extend beyond the sanding pad causing snagging, tearing of the paper or kick-back.
Extra paper extending beyond the sanding pad can also cause serious lacerations.
• Use a clamping device for securing the work piece.
• Keep your hands away from the work piece.
general saFeTY insTrUCTiOns
warning!
Read all instructions. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below
refers to your mains operated (corded) power tool or battery operated (cordless) power
tool. Save these instructions.
1) work area
a. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gasses or dust. Power tools create sparks which may ignite the
dust of fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.