Etatron eSelect-CD1, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 36

ENGLISH 7
eSelect-CD1 CONTROLLER SERIES INCLUDES SCREWS FOR WALL MOUNTING
eSelect-CD1 series is NOT provided with sensors, which are available upon request.
ETATRON D.S. declines any responsibility in case the controller is used with other brand probes and sensors
SAFETY STANDARDS
User information signs
WARNING: ignoring safety information can endanger life or result in serious injury!
CAUTION: ignoring safety information can result in injuries to persons or damage systems or materials!

HIGH VOLTAGE: ignoring this sign can result in death or serious injuries to persons!
NOTE or INFORMATION SOURCE
- this symbol “pointing finger” indicates programming steps.
- if no keys are pressed within 60 seconds, controller will display current measurements
Qualified and authorized personnel must carry out any work or repair on the unit: manufacturer declines any responsibility for
consequences in case this rule is not complied.
Unqualified personnel should keep away from the plant and/or hazard areas.
The official operator of the system or the plant, when installing the unit, is responsible to fulfil the above rules.