ES5392.1 High Current Switch Board (6-CH) - User’s Guide
25
ETAS
Design, Installation and Fuses
Mapping of Connection Strips of the Jumpers to the Digital Outputs at X1 PwrC-
trl
Position of Jumpers for the Digital Outputs of X1 PwrCtrl
Tab. 2-4
Configuration of jumpers for the digital outputs
of X1 PwrCtrl
The block diagram for the digital outputs is located in Fig. 3-3 on page 34.
Jumper
Dig. output
JP803
DIG_OUT_0
JP804
DIG_OUT_1
Position
Function
Pin 1-2
Pull-up circuit active (default configuration)
Open
Open-Drain
Note
Ensure that Pin 1 and Pin 2 of neighboring connection strips are not connected
by a jumper.
