ETAS ES5100.1, Руководство пользователя, Страница: 28 / 40

ES5100.1 Desktop Housing - User’s Guide 28
Configuration and Operation ETAS
To close the housing
• Place the housing lid onto the base so that the
hooks on the lid fit into the eyes of the base.
• Slide the lid around 2.5 cm back.
• Reattach the screws:
– The two screws on the back of the housing, top
left and right,
– the four nuts to secure the D-Sub ports
and
– the six Torx screws on the housing base.
CAUTION!
Check that the D-Sub ports fit exactly into the gaps on the rear of the
housing!