ETAS ES5100.1, Руководство пользователя

Страница: 17 / 40

ES5100.1 Desktop Housing - User’s Guide 17
ETAS Features and Functions
If one of the fuses is faulty, the device has to be sent in to ETAS to have it
replaced (see "ETAS Contact Addresses" on page 37).
2.3 Slots for I/O Boards
On the motherboard of the Real-Time PC, there are three slots of which one
accommodates the ES5340.2. The slots can be accessed from the back of the
ES5100.1.
How to install and remove boards is described in the section "Installing Boards"
on page 25.
The specification of the slots is described in the section "Expansion Slots"
on page 20.
Seen from the back, the ES5340.2 is situated in PCIe slot 4 (numbering depends
on the board manufacturer - see Fig. 2-6 on page 20 and Tab. 2-2 on page 20)
and occupies slots 1 and 2.
Slot 3 is designed to hold a single-width PCIe board in PCIe slot 5 and slots 4 (and
5) can accommodate a further PCIe board of single (or double) width in PCIe
slot 7.
2.3.1 Supported PCI Express Boards
Up to two ES5340.2 from ETAS can be used. If the ES5100.1 Desktop Housing is
operated with LABCAR-OPERATOR, the following cards can also be used:
• Elektrobit EB5100/EB5200 PCIe FlexRay
• IXXAT CAN-IB200/PCIe (CAN and LIN)
• IXXAT iPC-I XC16/PCIe (CAN)
Note
The ports on the breakout-box are rated to supply pure signal and activation
lines with max. 0.3 A current.
The ports are
not rated to supply voltages and power for sensors, drivers,
engines and the like! The ports are not rated to be connected with battery
voltages!