Introduction
6
Features
The ES1232.2-A has the following features and components:
•
VME64x slave interface
•
High performance interface board to an ETK
•
ETK Interface Operating Modes: Basic, Compatibility, Advanced
•
ETK Protocol Speed: 100 MBit/s and 8 MBit/s
•
ETK Protocol Transfer: Single Mode and Block Mode
•
Up to 32 rasters for measurement and rapid prototyping
•
ETK Support: automatic detection and configuration
•
ETK Interface galvanic isolated
•
Motorola MPC555 40-MHz processor
–
4 MByte SRAM (32-bit, burstable)
–
2 MByte Flash (16-bit)
•
Data Acquisition Memory Controller (DAMC) for linking the ETK to the
ES1000 system in real time
•
16 MByte Data Acquisition Memory on board
•
Up to 4 ETK interfaces (e.g. four
ES1232.2-A
boards) can be operated
simultaneously on an ES1000
•
Firmware update with service software on PC
•
Extended temperature range from -40 °C to +85 °C / -40 °F to +185 °F
These features guarantee that the real-time requirements are fulfilled when
the ES1000 is used.
1.3
System Requirements
1.3.1
Hardware
An ES1000.2 system or an ES1000.3 system is required for the ES1232.2-A
ETK Interface Board.
1.3.2
Software
The following software versions (or higher) support the ES1232.2-A board:
•
INCA V5.2
•
ASCET-SD V5.1.1
•
ASCET-RP V5.4
•
INTECRIO V1.0
ES1232_1-ug-en.book Seite 6 Freitag, 28. Januar 2005 12:14 12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
