manualshive.com logo in svg

ETAS BR XETK-S1.0, Руководство пользователя

Поделиться
Скачать
ETAS BR XETK-S1.0 Скачать руководство пользователя страница 19

ETAS

Hardware Description

BR_XETK-S1.0 - User’s Guide

19

4.3

Automotive Ethernet Interface

The Automotive Ethernet interface of the BR_XETK-S1.0 can not be connected 
to a PC directly, but a media converter has to be inserted in between.

Its purpose is to transform the physical layers of Automotive BroadR Reach 
Ethernet (1 differential pair / 2 wires) into Standard Ethernet (2 differential 
pairs/ 4 wires) and vice-versa. The media converter has to be connected to 
CON1 (refer to Fig. 4-4).

The combination of the BR_XETK-S1.0 and the Automotive Ethernet media 
converter is integrated in the ETAS IP world with automatic IP management 
and supports the open automotive "Universal Measurement and Calibration" 
standard "XCP on Ethernet" (TCP/IP, UDP/IP). 

The open "XCP on Ethernet" interface allows for connecting to the BR_XETK-
S1.0 with third party application software.   

Fig. 4-4

Location of the BR_XETK-S1.0 Ethernet Interface connector 
(CON1)

NOTE

The Automotive Ethernet interface is not compatible with the standard Ether-
net interfaces of ETAS modules. A CBEB10x.1 Media Converter or an ES88x 
ECU Interface Module is needed to connect the BR_XETK-S1.0 to the PC.

NOTE

Please see chapter 7.1.2 on page 35 for additional information regarding PC 
requirements for the Ethernet interface.

CAUTION

See chapter “Requirements for failsafe Automotive Ethernet Operation” on 
page 28 for details on wiring the Automotive Ethernet interface cables.

CON1

Содержание BR XETK-S1.0













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды