7
Instructions for Use:
Please read the instructions carefully and follow guidelines to properly adjust your
Star Mattress Overlay. Failure to comply with the instructions may cause improper
inflation of this dynamic airflow product, resulting in a loss of therapeutic value.
Inflating the Mattress:
1.
Remove all bed linens except the support mattress pad or sheet from
existing bed mattress. Place the Mattress Overlay sections with the air cells
facing up, on the top of the bed mattress. Align the sections and snap them
together.
2.
Turn the silver tip valve counterclockwise to open. Only open one valve per
section, keep the other valve closed. Do not apply pressure when opening
and closing valve. The valve maintains a tight seal with little effort.
3.
Attach the rubber hose end of the black hand pump to the open valve.
Be
sure the pump hose is placed tightly over the valve.
4.
With the pump attached, pump to moderate inflation.
Note: Moderate inf
l
ation is achieved when the center of the mattress section
begins to arch.
5.
Turn the valve clockwise to close. Remove the pump. Repeat steps 2-4 for
remaining mattress sections.
