26
14:2 Padded cover, armrest
The armrests can either be supplement-
ed with, or ordered complete with, a
padded or gel cover.
They are manufactured in dark grey
plush and are washable.
14 Assembly instructions accessories
Assembly instructions are provided
with all accessories when they are
supplied by Etac.
Instructions are also available on our
website www.etac.com
The armrest comes in two versions, with
short or long armrest guard.
To remove the armrest, move the spring-
mounted lever backwards, towards the
armrest bracket, and lift up the armrest.
14:1 Armrest, lockable and detachable, height adjustment
Height adjustment: The screw/nut is used
both to set the height of the armrest and
secure the side guard:
• Undo screw and nut.
• Slide the side guard up or down to
the desired height.
• Secure the sideguard again.
Tools: 5 mm Allen key.
Never use the armrests to lift the
wheelchair.
(!)
The padded cover makes the
armrest 1.5-2 cm higher.
14:4 Tray
The tray is made of polycarbonate, with
a recess to fit round the body. It is avail-
able in a range of sizes depending on
the wheelchair’s width.
It is mounted on the long armrests us-
ing Velcro straps.
The height is adjusted along with the
armrests.
Tools: 5 mm Allen key (for
adjusting the height of the
armrests)
14:3 Armrest cushion Hemi
Swing-away for mounting on long
armrests.
