37
36 / 65
GB
As soon as you have cleaned your teeth replace the brush
with the oral irrigator. Attach the selected nozzle (
D1
) to the
oral irrigator and put the nozzle tip between two teeth at the
gum line level at a 90 degree angle. To prevent the water
from splashing, press the lips slightly together around the
nozzle, but keep the mouth slightly open so that water can
flow out smoothly.
Lean over the washbasin while cleaning your mouth.
Slowly guide the nozzle until you feel it settle between
the next two teeth, smoothly follow the gum line and the
shape of your teeth. Continue doing so until you clean all
inter-dental spaces, including the molars, in all areas of
the mouth.
Do not apply any pressure on the nozzle,
let it do all the work on its own.
Depending on the
selected mode of cleaning, the full water reservoir (
C7
) will
last for about 45 - 60 seconds. For optimal mouth irrigation,
we recommend refilling the reservoir 2-3 times.
Tongue scraper (D3)
Use the tongue scraper to clean your tongue. To clean
the tongue, move the attachment gently across the entire
area of the tongue back and forth. Start cleaning with the
S
mode; switch to the
N
mode if required.
Orthodontic nozzle (D4)
The nozzle is designed for cleaning hard-to-reach areas
around fixed braces.
Guide the nozzle slowly along fixed
braces, smoothly contouring their shape. Stop shortly at
each tooth and use the brush at the end of the nozzle to
clean the area around the braces wires and locks. Continue
doing so until you clean all teeth, including the molars, in
all areas of the mouth.
Do not apply any pressure on the
nozzle, let it do all the work on its own
.
When cleaning is finished
– Open the water reservoir (
C7
) and empty it, pouring any
remaining water in the washbasin.
– Switch the oral irrigator on for a few seconds so
as to empty the inside as well.
– Wipe all the components with a dry cloth.
