The front cover of the brush cylinder (depending on model) can be removed for easier and
more comfortable maintenance by releasing the arrest latches on its sides and sliding it out.
At the same time, make sure no dirt is stuck on the inner side of the nozzle (i.e. turbine).
Release the two arrest latches on the bottom side of the nozzle in the direction of the arrow
and remove the cover. Clean the space with a suitable tool (e.g. tweezers). Insert the covers
back into the nozzle reversely and close it with by folding it up (you hear an audible click).
VI. TROUBLESHOOTING
Problem
Cause
Solution
Motor won‘t start Power supply not connected
Check the cord, plug and the socket
button is not switched on
Push button
The container
cannot be put
into the vacuum
cleaner -
activated safety
lock
The parts of the filtration
system not inserted properly in
the container
Check/adapt the position of the
separator/foam micro-filter and the
HEPA filter in the container
Suction output is
not sufficient
Regulation in MIN position
Set regulation to MAX.
Open suction
Close the hole in the hose handle
Dust container full
mpty the container
Clogged micro-filters
Clean or replace the micro-filters
Nozzle, suction hose or tube is
clogged
Remove blocking objects
The cable
cannot be
wound in the
entire length
Twisted cable
Straighten the cable
Take out about 50 cm of the cable
and push again button
VII. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be taken
over free of charge. Suitable disposal of the product can help to maintain valuable natural
resources and to prevent possible negative impacts on the environment and human health,
which could be the possible consequences of improper waste disposal. Ask for more
details at the local authorities or at a nearest collection site. Fines can be imposed for
improper disposal of this type of waste in agreement with the national regulations. If the
appliance is to be put out of operation, we recommend its cutoff after disconnecting it from
power supply and in this way it will not be possible to use the appliance again.
24
GB
/ 39