eta PURIS, Инструкция по эксплуатации

Страница: 23 / 48

B3 – fan speed button B8 – child safety lock
B4 – “SLEEP” button B9 – ionization button
B5 – display B10 – filter replacement indicator
C – remote control (ETA356900080)
C1 – ON/OFF switch „POWER“ C5 – timer button „TIMER“
C2 – auto mode button
A
„AUTO“ C6 – child safety lock „LOCK“
C3 – fan speed button „SPEED“ C7 – ionization button „ION“
C4 – button „SLEEP“
The buttons feature a signal light indicating activity of the given function.
III. INSTRUCTIONS FOR USE
CONTROLS
Remove any packaging material from the appliance, including filter packaging, etc. After
switching the purifier into standby mode, plug the power cable A7 in electrical socket. An
acoustic signal will sound, and B1 button backlight will turn red.
ON/OFF button
B1
– by pressing the button, the purifier will switch on in the basic filtration
mode (without ionization, speed 1). You will hear a signal sound, the
background colour of the buttons B1 and B3 will change to white and
the signal light B6 will turn green (depending on the air condition).
When you press the button again, the settings will be cleared and the
purifier will switch back to the standby mode.
Auto mode button B2 – the AUTO mode identifies the quality of air in the room and adjusts
the filtration (fan) speed accordingly. When you press the button,
the mode will be activated, when you press the button again, it will
switch off and the fan output will switch to manual control at the
lowest speed.
Fan speed button B3 – by pressing the button, you change the fan speed at 4 levels of
intensity. Each backlit field of the fan blade represents the given
speed (1 the lowest speed, 4 the highest speed).
SLEEP button B4 – when you press the button, the purifier will be activated in the lowest
speed mode and the backlight of all indicators will be off - just this
button will remain faintly backlit. This feature is suitable for minimum
disruption when sleeping.
Timer button B7 – by pressing the button, delayed shut-off in 2, 4 or 8 hours will be
activated. After this time, the purifier will turn off automatically and switch
to the standby mode. When you press the button repeatedly, you set: 2
hours - 4 hours - 8 hours - feature OFF ...
Child safety lock B8 – To activate and deactivate the lock of the button control, keep the
button B8 pressed (for 3 seconds).p
Ionization button B9 – when you press the button, the ionizer will be activated and start
ionizing the air passing through. When you press the button again,
the feature will switch off.
When the feature is activated, the relevant button is backlit and a signal sound is heard.
GB
23 / 41