eta Leila 0271, Руководство пользователя

Страница: 19 / 36

III. INSTRUCTIONS FOR USE
Check if the dual voltage switch A12 has been set to the local mains voltage before you
connect the appliance (fig. 2). Lift off the handle A3 to the operating position so that its
arrest is ensured. At first switch the iron ON to maximum temperature and let the iron at
least 10 minutes running without water.
Ironing without steaming
Plug the power cord A9 to electric socket. Put the iron to the rest position (Fig. 8). Turn the
steaming regulator A2 to the position, steaming off (Fig. 6) or pour out water from the
container A8 . Set the temperature using regulation temperature dial A5 according to the
selected fabric material (Fig. 3). Reaching the required temperature is shown by turning the
indicator lamp A6 OFF.
Recommendation
Control temperature dial A5 (Fig. 3) is marked with international symbols that recommend
the optimum ironing temperature and they are the same as marking on some types of
laundry and textiles (Fig. 4). When the temperature is increased from the cold state or if the
temperature is set from higher to lower, we recommend waiting for a while due to stabilization
of the ironing plate temperature.
Steam ironing
Hold the iron in your hand, turn the steaming regulator
A2
to the position (Fig. 6) and
slide the cover
A1
to open the filling container lid. Pour in water to the container
A8
(Fig. 5)
and close the filling hole lid in the opposite direction.
Keep the position of the iron for
pouring in water.
Put the iron to the rest position (Fig. 8). Plug the power cord
A9
to
a socket. Select the temperature setting ••• most suitable for the fabric to be ironed. When
the control light A6 goes off, move the steaming regulator A2 to the position , steaming on.
Place the iron to the rest position, automatic creation of steam will stop (more steam may be
going out for a short time).
Warning
– Setting to pressure steam ironing os recommended only if the regulation temperature dial
A5 is set to temperature setting •••.
– When water container A8 is filled with water over the permitted limit ( MAX. 35 ml ), steam
can be created even in the rest position.
– At places with hard water we recommend diluting it with distilled water.
Intensive steaming (steam shock)
Use only if the steam ironing is insufficient. In this case press intensive steaming button
A4 several times (Fig. 7A – ). Thus you will get additional steam except for the steam
created by standard steaming. An intense „burst“ of steam penetrates deep into the fabric.
For optimum steam quality, leave an interval of at least four seconds between pressing the
Surge of Steam button.
WARNING
– When you press intensive steaming button
A4
several times, water may drip from
the ironing plate due to excess water in the steam chamber. Do not consider this
as faulty operation.
– T he shot-steam function can only be used at high temperatures.
!
GB
19 / 31