eta Frost 2568, Инструкция по эксплуатации

Страница: 25 / 52

IV. INSTRUCTIONS FOR USE
Once connected to the mains, the appliance will switch to standby mode.
B11
indicator
will light up at the same time. To start the appliance, press the switch on/off button B1 –
air blowing will be activated in the normal mode at the medium speed, and the respective
icons will appear on the display. Now you can change the mode and functions by the
respective buttons – see below. To terminate any function and to switch off the appliance,
press repeatedly press the switch on/off button B1 .
1) BLOWING MODE
3 different air blowing modes are available. Normal, natural and sleep modes.
The mode is selected by pressing B2 button. Modes can only be changed under the cooling
and ventilation fan functions.
A) Regular mode ( ) depends on manual setting of the blowing speed, which
is maintained the same.
B) Natural mode ( ) tries to imitate air circulation in the nature. Therefore it alternately
switches on and off the ventilation depending on the speed setting, while changing the
blowing speed. The blowing intensity is changed as follows when the respective blowing
speed is set up:
Low speed
High speed
Medium speed
Low speed
Pause 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s
Medium speed
High speed
Medium speed
Low speed
Pause 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s
High speed
High speed
Medium speed
Low speed
Pause 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s 5 s
25
GB
/ 46