eta FRESHIE II 2762, Руководство пользователя

Страница: 23 / 52

23 / 45
GB
22
Malfunction Cause Solution
Weld on the foil is
not tight
Creases in the seal Smooth out the foil then repeat
welding
Welds follow too fast after each
other
Keep the 30 second break
between individual welds
Food leftovers or moisture in
the weld
Remove the food leftovers and
dry the foil
Not keeping the time necessary
for processing the weld
Wait until the control light turns off
Pressing only one side of the lid Press the lid tight with both hands
Unsuitable foil/bag.
Only use bags/foils supplied by
the manufacturer
The welder does
not suck air
The bag is not in the sucking
area
Place the bag correctly
The bag is stuck together
before the nozzle
Lift the bag slightly and stretch
The sucking nozzle of the
exhauster is clogged
Clean the nozzle
The weld is melted
too much
The welding part is too hot Leave the welder open to cool
down for a few minutes
Use of a plastic bag Use foils supplied by the
manufacturer
The air is not
properly sucked out
The sucking is insufficient There is a hole in the foil
Use of a plastic bag Use foils supplied by the
manufacturer
Improper placement of the bag
into the sucking area
Insert the whole open part into
the sucking area
If the gaskets A5 and A6 are damaged, please contact the authorised service centre.
Expert service must do the large maintenance or to intervene into inside parts of the
appliance! Non-observance of the instructions of the manufacturer cancels the right
for guarantee repair!
If you are unable to fix the problem, or if you need any further information about the
appliance or service centres, please contact your distributor.
VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electric or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be taken
over free of charge. Suitable disposal of the product can help to maintain valuable natural
resources and to prevent possible negative impacts on the environment and human health,
which could be the possible consequences of improper waste disposal.