eta Experto 0069, Инструкция по эксплуатации

Страница: 16 / 40

16
GB
/ 33
Notice
–
Ensure good quality of coffee. We recommend that you check
coffees for presence of any foreign objects before milling (e.g.
fragments of stones) which could damage the product (e.g. abrade
the grinding discs). Possible complaints within the warranty period
as a result of these impurities will not be taken into account.
– The coarseness of grinding may be adjusted while the drive unit is running! If the
grinding selection regulator is too stiff, press the button ON on the grinder while rotating
the grinding selection regulator at the same time. This allows the ground coffee caught
between the grinding stones get out of the appliance .
– Continuously check the coffee quantity in the container because the outlet opening
could be blocked with ground coffee container
B
.
– Preparation (processing) time ranges in units of seconds, depends on the quantity, type
and quality of used coffee beans and on the set fineness of grinding (level 3 approx.
10 g coffee / 15 seconds).
III. OPERATING INSTRUCTIONS (Fig. 1, 2, 3, 4, 5)
Plug power supply
A10
fork to the electric power. Remove the coffee beans container lid
B1 . Set the desired grain size by rotating the control knob A2 placed on the body of the
grinder (fig. 3). Spill some coffee beans in the coffee beans container
B
(fig. 2) and close
the lid pushing it firmly. It is advisable to grind the first few packs (about 500 g) of coffee
at setting
8
. The lower the setting the finer the grain size (1 to 16). Set the selector grind
time selection knob A1 (fig. 4) the quantity of coffee corresponding to the number of cups
for which you want to grind the beans: the relative number appears (1 – 50 seconds / cups
2 – 10).
WARNING: Please check if the C2 cover is taken off and that the opening in the
container has been put vertically under the A6 outlet opening.
The grinder is switched ON (control light is on), and OFF by the ON/OFF button
A4
(fig. 5a).
Once the previously time of grinding a coffee is reached, the appliance will stop
automatically (control light is off). If you want to stop the appliance before grinding is
finished, press the button A4 again. Remove the pre-ground coffee container A9 . Remove
the lid
C1
gently tap the container and pour the pre-ground coffee into the filter of the
coffee machine. To install the filler in the grinder follow the above procedure in the reverse
order.
Use of attachments (D)
– portafilters Ø 50-54 mm / 58 mm
Insert the selected attachment D into the holder A5 as far as it will go (fig. 5b). Grasp the
lever (portafilter) of your espresso and slide it into the holder as far as it will go (fig. 5c).
Coffee grinding is switched on automatically. Ground the required amount of coffee.
Inversely, remove the lever (portafilter) from the holder, the grinding is stopped and the
appliance is switched off.
Recommendation
– The lower the degree you set, the finer the coffee is ground.
– For roasted light / dry beans, set the regulator into the FINE grinding position.
For roasted dark / fatty beans, set the regulator into the COARSE grinding position.