eta EFECTIV, Инструкция по эксплуатации, Страница: 24 / 64

Vacuum cleaner
After finishing every „ wet “ vacuuming, rinse the waste tank (shower it) for sanitary reasons
in running water and let it dry. Treat the surface of the appliance with a soft and damp
cloth, do not use coarse and aggressive detergents!
Nozzles (big, small) for wet vacuuming
It is recommended to check the nozzle for possible impurities after every „ wet “ vacuuming.
If there are some impurities, remove them. Rinse the accessories (shower them) for
sanitary reasons in running water and let them dry.
Floor nozzle / brush / TURBO nozzle
It is recommended to check the collectors / brushes for possible impurities after every
vacuuming. If there are some impurities, remove them.
Micro–filter and HEPA filter
Check and if necessary, replace both micro–filters after about 10 vacuuming. You can
buy spare filters in the elektro shop chain. After finishing every „wet“ vacuuming, clean the
micro–filters:
– Micro–filter A9 : take it out by pulling (Fig. 13)
– HePA filter
A10
: release it by turning it in the direction of the „ „ symbol and then
remove it by pulling (Fig. 14).
Clean the micro–filter and the HePA filter in running lukewarm water. e.g. using a cloth
or a soft brush and let them dry completely (Fig. 16). Re–assemble individual parts in the
opposite direction. You can speed up drying by assembling the vacuum cleaner and by
sucking clean air for several minutes. This will dry not only the waste tank, but also the
tubes and the hose.
VII. TROUBLESHOOTING
Problem Cause Solution
Motor won‘t start Power supply not Check the power cord, the plug and
connected the socket
The button is not Push on/off button
switched on
The suction Open suction Close the hole in the hose handle
performance is not
sufficient dust container full empty the container
Clogged micro–filters Clean or replace the micro–filters
Nozzle, suction hose or Remove the blocking objects
tube is clogged
The suction Wet impurities container empty the container
performance is is full
insufficient safety float
activated
GB
24 / 62