GB - 50
GB
5. VACCUM CLEANER USE
5.1
SWITCHING ON THE VACUUM CLEANER
1. Set the main switch
A6
to position
"I"
.
2. An acoustic signal will sound and the light signal for buttons
C1
and
C2
will flash green.
Note
If you use the vacuum cleaner together with the charging station and the scheduled
cleaning function, leave the main switch in the
"I"
position at all times (ON).
5.2
BATTERY CHARGING
1.
Check that the charging station is properly connected to the mains. (light
D1
must be on).
2. Place the vacuum cleaner near the charging station and press the
F9
button on the
remote control. If the battery is too low, place directly and correctly the vacuum cleaner
on the charging station.
Remarks
– The vacuum cleaner can be charged by directly connecting adapter
E
to power
connector
A7
. After charging, it is necessary to disconnect the power adapter from
the
A7
connector of the vacuum cleaner.
– The standard charging time is approx. 6 hours. A fully charged battery will provide an
operating time of up to approximately 120 minutes.
– After cleaning, the vacuum cleaner will automatically search for the charging station.
– The
"ETA SMART"
application makes it easy to find out the battery status. The
application can also be sent back to the charging station at any time.
5.3
START / STANDBY / SLEEP MODE
Start (Cleaning): the indicator light is green.
Standby mode (Pause): the indicator light flashes green.
Sleep mode: the indicator light is off.
Start (Cleaning)
1.
Check that the main switch
A6
is in the
"I"
position.
2. By pressing the buttons on the control panel (
C1
/
C2
) or using the remote control
F
start
the vacuum cleaner.
Standby mode (Pause)
Press the
C1
button on the control panel or the
F2
button on the remote control to interrupt
the ongoing cleaning and put the vacuum cleaner in standby mode.
Содержание Aron 2512
Страница 132: ...e 23 2020 DATE 27 05 2020...