eta 9153, Руководство пользователя

Страница: 20 / 44

– The power cord must not be damaged with sharp or hot objects, open fire, it must not
be sunk into water or bent over sharp edges.
– If you need to use an extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
II. DESCRIPTION OF THE APPLIANCE
A – electric kettle
A1 – water gauge A5 – lid lock button
A2 – handle A6 – tea strainer
A 3 – lid A7 – sieve adaptor
A4 – lid lock button
B – re movable stand with control panel *
B1 – central connector B4 – temperature maintenance button
B2 – supply cord B5 – temperature setting buttons
B3 – on/off button B6 – LED panel
* The control electronics ensures the appliance turns off automatically after the set
temperature or boil of water has been reached.
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the electric kettle with the stand. Remove all
possible adhesion foils, stick-on labels or paper from the appliance. Before the first use, fill
the electric kettle with clean water to the maximum level, turn it on and let the water boil.
Then pour out the water and repeat the procedure several times (at least five times).
APPLICATIONS
Unwind the necessary length of the power cord B2 from the storage space of the stand B .
Place the stand on a suitable surface, in the height of about 85 cm, out of reach of children
and incapacitated persons and plug the fork of the power cord to the electric socket. Hold the
kettle A on the handle A2 . Open the lid A3 by pressing the lock button A4 . Fill the kettle with
drinking water. The minimum and maximum amount of water is marked on the water gauge
A1 . Close the lid by snapping. Put the electric kettle on the stand (button B3 flashes and
the kettle enters standby mode).
Press B3 to turn on the kettle at 100 °C. If you want to change the temperature, you can
change the temperature before switching on the kettle (or even during heating) using the
B5 buttons. Active heating is indicated by the flashing of the selected temperature
diode on the LED panel B6 and the steady light of button B3 . As soon as the heating is
complete and the appliance is switched off, the B3 button flashes and the temperature
reached LED on the B6 LED lights up permanently.
GB
20 / 38