–
Unplug the appliance from the mains after finishing by pulling out the fork of the supply
cord from the el. outlet.
– The electric kettle is intended for heating the maximum of
0,5 l
of water. If the water level
exceeds the maximum recommended amount, hot water may be splashing out.
– Prevent injuries when handling (e.g.
by hot water, steam
).
– Do not touch outer surfaces during operation of the kettle, they are hot and there is a risk
of getting burned.
– The appliance is equipped with the heat safety lock which disconnects power supply if
the steam sensor fails, if water boils away or if an empty kettle is turned on. If it happens,
unplug the appliance from power supply and let it cool down. Do not fill the kettle with
cold water in order to cool it down quickly. It could reduce life of the heating element.
– Check the condition of the power cord of the appliance regularly.
– The power cord must not be damaged with sharp or hot objects, open fire and it must
not be sunk into water or bent over sharp edges. Never put it on hot surfaces or do not
let it hang over the edge of a table or work tables. Hitting, stumbling or pulling the power
cord e.g. by children can result in tilting over or drawing the appliance down and serious
injury!
– If you need to use the extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
–
Before switching on the kettle ensure that the water level is on MAX mark.
– Never use the appliance for any other purpose than for the intended purpose described
in these instructions for use!
– The producer is not responsible for damage caused by improper use of the appliance
(e.g.
burning, scalding, fire
) and its guarantee for the appliance does not apply to
situations when the safety warnings above are not complied with.
II. Features of the device
(pic. 1)
A – kettle
A1 – RESET button (steam fuse switch*)
A5 – lid
A2 – indicator light
A6 – supply cord
A3 – max. water volume mark MAX
A4 – handle
B - 2 cups
* The steam fuse ensures the appliance turns off automatically after reaching boil.
III. INSTRUCTIONS FOR USE
(pic. 1)
Remove all packaging material, remove the kettle. Remove all adhesive foils, stickers or
paper from the appliance. Fill the kettle with clean water up to max., turn it on and let the
water boil before first use. Then Pour the water out and repeat the process several times
(at least five times).
Hold the kettle
A
by handle
A4
. Pull the protrusion in the lid to open the lid
A5
. Fill the
kettle with drinking water. The maximum volume of water is marked by a line
A3
inside
the kettle, the minimum volume must fill up the heating bottom. Close the lid with a snap.
Place the filled kettle on a suitable solid flat surface (see par.
I. SAFETY PRECAUTIONS
).
Plug the fork of the supply cord
A6
into an el. plug. If the indicator light
A2
is on, the kettle
is heating the water. In case the indicator light is not on, press the
RESET
button, which
will put the kettle in operation. After reaching the boiling point, the appliance turns off
automatically. Unplug the kettle from the mains by pulling out the fork of the supply cord
A6
from the outlet.
12
GB
Содержание 7188
Страница 2: ...2...
