eta 355690000, Руководство пользователя

Страница: 86 / 120

• It is the customer’s responsibility to prepare
the dryer’s installation place, as well as the
electricity and waste water installation. Before
installation, check the dryer for damage. If
damaged, do not have it installed. Damaged
products may endanger your health.
• Install the dryer on a stable and flat surface.
• Run the dryer in a dust-free environment where
the air ventilation is good.
• The clearance between the dryer and the floor
should not be
reduced with objects such as
carpets, wood or tape.
• Do not block the ventilation grills
found on
the plinth of the tumble dryer.
• The appliance must not be installed behind a lockable
door, a sliding door or a door with a hinge on the
opposite side of the tumble dryer, in such a way that
blocks the full opening of the tumble dryer door.
• Once the dryer has been installed, the
connections must remain stable. When installing
the dryer, make sure that the rear surface is not
leaning on anything (e.g. tap, socket).
• The operating temperature of the dryer is +5°C to
+35°C. If operated out of this temperature range,
the performance of the dryer will be affected
negatively and the product will be damaged.
• Be careful when carrying the product since it is
heavy. Always wear safety gloves.
• Always install the product should be placed
against a wall.
6
EN
/ 37