eta 239690001E, Инструкция по эксплуатации

Страница: 99 / 164

EN
EN - 99
Are of limited suitability
• Some types of glasses can become dull after a large number of washes
• Silver and aluminium parts have a tendency to discolour during washing
• Glazed patterns may fade if machine washed frequently
Note
• Do not put in items that are dirty of cigarette ash, candle wax, lacquer or paint.
• If you buy new dishes please make sure that they are suitable for dishwashers.
• Please do not overload your dishwasher.
• Do not use dish that is not suitable for dishwashers. This is important for good results
and for reasonable energy consume.
Damage to glassware and other dishes
Possible causes
• Type of glass or manufacturing process. Chemical composition of detergent.
• Water temperature and duration of dishwasher programme.
Suggested remedy
• Use glassware or porcelain dishes that have been marked di shwasher-proof
by the manufacturer
• Use a mild detergent that is described as kind of dishes If necessary, seek further
information from detergent manufacturers.
• Select a program me with as low a temperature.
• To prevent damage, take glass and cutlery out of the di shwasher as soon as po ssible
after the programme has ended.
VI. TURNING ON THE APPLIANCE
Saving energy
• Pre-rinsing of tableware items leads to increased water and energy consumption
and is not recommended.
• Washing tableware in a household dishwasher usually consumes less energy and
water in the use phase than hand dishwashing when the household dishwasher is used
according to the instructions.
Starting a cycle wash
1. Draw out the basket, load the dishes and push them back.
2. Pour in the detergent (see the section e`ntitled Salt, Detergent and Rinse Aid).
3. Insert the plug into the socket. The power supply is 220 – 240 V AC / 50 Hz, the specification
of the socket is 10 A 250 V AC. Make sure that the water supply is turned on to full pressure.
4. Press the ON/OFF Button.
5. Press the program Button, the wash program will be changed.
6. If a program is selected, the response lightwill light. Then close the door,
the dishwasher begins to start.
WARNING!
When you press the START/PAUSE button to pause during washing,
the program light will stop blinking and the dishwasher will mooing every
minute unless you press the START/PAUSE button to start.