EN
EN - 97
HOW TO DRAIN EXCESS WATER FROM HOSES
•
If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained
directly into the sink. It will be necessary to drain excesswater from hoses into a bowl
or suitable container that is held outside and lower than the sink.
WATER OUTLET
•
Connect the water drain hose.
•
The drain hose must be correctly fitted to avo id water leaks.
•
Ensure that the water inlet hose is not kinked or squashed.
EXTENSION HOSE
•
If you need a drain hose extension, observe to use a simil ar dr ain hose.
•
It must be no longer than 4 metres; otherwise the cleaning effect of the dishw asher
could be reduced.
SYPHON CONNECTION
•
The waste connection must be at a height of max.100
cm from the bottom of the dish.
•
The water drain hose should be fixed by a hose clip.
Start of dishwasher
The followings should be checked before starting the
dishwasher.
1. Whether the dishwasher is level and fixed
2. Whether the inlet valve is opened
3. Whether there is leakage at the connections of the
conducts
4. Whether the wires are tightly connected
5. Whether the power is switched on
6. Whether the inlet and drain hoses are knotted
7. All packing materials and printings should be taken out from the dishwasher
