– The manufacturer assumes no responsibility for any damage caused by improper handling of
the appliance and its accessories (e.g.
electric shock, fire
), and the appliance guarantee will
become void if any of the aforementioned safety instructions are not observed.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1,2)
A – Main unit
A1 – Pollution sensor opening
A6 – HEPA filter 4 in 1
A2 – Air condition indication
A7 – Pre-filter
A3 – UV lamp
A8 – Rear cover
A4 – Protective sleeve
A9 – Handle
A5 – UV lamp cover
A9 – Power cable
B – Control panel
B1 – Switch on/off button ( )
B6 – Timer button ( )
B2 – Fan speed button ( )
B7 – Timer indicators
B3 – Speed level indicators
B8 – UV disinfection function button (
)
B4 – Ionisation function button ( )
B9 – Filter
A6
replacement indicator
B5 – “SLEEP” function indicator ( )
B10 – Filter
A7
replacement indicator
B1, B2, B4, B6
and
B8
buttons are backlighted in colours indicating the respective function
activity.
III. INSTRUCTIONS FOR USE
CONTROLS
After switching the purifier into standby mode, plug the power cable
A9
in electrical socket.
An acoustic signal will sound, and
B1
button backlight will turn red.
Switch on/off button
B1
– Press the button to switch on the purifier in the basic filtration mode
(without UV and ionization, speed 1).
B1
and
B2
button backlight
will turn blue. The set functions may be cancelled by repeated
pressing of these buttons, and the purifier may be switched back
to the standby mode.
Fan speed button
B2
– You can switch the fan speed by repeated pressing of this button as
follows: 1 (low) – 2 (medium) – 3 (high) – AUTO. The AUTO mode
will automatically recognise the air quality in the room and will adapt
the filtration (fan) speed accordingly. The respective indicator light
B3
will indicate the respective speed setting.
Ionization function button
B4
– Pressing this button will activate ionizator, which will start
ionizing the air flowing through. The function activity is
indicated by blue backlight of the ionization button. Press the
button to switch off the function.
UV function button
B8
– Press this button to activate UV sterilization of the air flowing
through. The function activity is indicated by blue backlight of UV
function ionization button. Press the button to switch off the function.
Timer button
B6
– Press this button to activate sleep function to switch off the device after 2,
4 or 8 hours. After the set period expires, the purifier shall automatically
switch to standby mode. You may set the following values by pressing the
button repeatedly: 2 hours – 4 hours – 8 hours – function switching off ...
GB
23 / 39
