eta 0627, Инструкция по эксплуатации

Страница: 15 / 32

A4 – input foam filter
A5 – ultrasound converter
A6 – power supply
B – water tank
B1 – handle
B2 – water steam escape opening
B3 – cap with a valve
III . PREPARATION FOR USE
Remove all packaging, take the humidifier out. Remove all adhesion foils, stickers or paper
from the humidifier. Put the humidifier on a flat, stable, smooth and clean surface, out
of reach of children and incapacitated people (see par. I. SAFETY WARNING). Provide
sufficient free space for ventilation. The appliance openings allow free airflow and must not
be covered or otherwise blocked. The feet must not be removed. Electric power socket must
be easily accessible to allow easy disconnecting of the humidifier in the case of emergency.
This is a touch control panel. This is a touch control panel. Therefore, no pressure needs to
be applied to touch the symbols displayed.
Note
The ultrasound humidifier creates microscopic drops of water with the diameter of
about 1 – 5 μm using high-frequency oscillator. The ventilation system then blows
them out in the form of vapour (fog) into the room where they evaporate and thus
increase air humidity.
INSTRUCTIONS FOR USE
1. Place the humidifier on a suitable flat surface.
2. Remove the tank B from the humidifier A in accordance with Pic. 1.
3. Remove the water tank cap with a valve B3 from the tank B by rotating it (see the detail
in Fig. 1). Fill the tank B with clean drinking water (at least 300 ml, ideally 1–2.9 l). Put
the cap with a valve B3 in place by rotating it in CLOSE direction.
4. Place the tank B on the humidifier A in a reverse way.
5. Connect the plug A6 to the power supply.
6. Active the humidifier with the first press and holding symbol (approx 2 sec.) will put the
appliance on max. power (which is indicated the light indicator is blue).
7. Anytime during operation, you can change the power of the humidifier by briefly by
pressing this symbol is gradually increasing performance, each time by one degree or
You can turn the humidifier off any time by pressing and holding this symbol .
Notes
– The humidifier is designed for creating optimal air humidity in the room and it also
limits the occurrence of static electricity.
– As soon as the water level drops below the operating minimum, the humidifier
automatically stops the production of vapour (
the light indicator is red
).
– The maximum volume (2.9 l) of the tank provides operation for about 12 hours.
– If you do not use the humidifier for more than one day, pour out the unused water
from the tank and the internal parts of the humidifier.
15
GB
/ 27