eta 0626, Инструкция по эксплуатации

Страница: 18 / 36

ionization button (C3) – press to activate the generation of negative ions. Press again
to deactivate this function.
timer button (C4) – Pres to set time of operation from 1 to 12 hours. The humidifier
automatically turns off when the time runs out.
intensity button (C5)
– press to toggle one of the three steam intensities (low-medium-
high).
hot steam button (C6) – press to activate the heating of the inner tank leading to the
generation of hot steam. Press repeatedly to turn off the function.
night mode button (C7) – press to switch the unit to night mode with low panel
illumination. Press repeatedly to switch back. Pressing the
button for a long time activates sleep mode, which turns off the
backlight. Press any button to cancel this mode.
Warning
– If there is not enough water in the humidifier tank, the C8 icon will appear on the
display and the humidifier will shut down. To restart the unit, fill the tank with water
and start the unit again.
– Acoustic signal sounds each time you press the button.
– The effect of a particular setting is indicated on the C8 display, or the function key
is lit.
– Display C8 shows the actual measured relative humidity and room temperature.
INSTRUCTIONS FOR USE
1. Place the humidifier on a suitable flat surface.
2. Remove the tank B from the humidifier A in accordance with Pic. 1.
3. After unscrewing
B3
valve fill the tank
B
with water (at least 500 ml, ideally 2 – 7 l).
You can add a few drops of the appropriate flavouring to the aroma of the B5 liner.
4. Place the tank B on the humidifier A in a reverse way.
5. Connect the plug to the power supply.
6. Switch on the humidifier and, if necessary, set the required functions.
7. After operation, switch off the unit and unplug it.
Notes
– Only add a few drops of liquid aromatic additives to the vessel B3 .
– The maximum volume of the tank provides operation for about 30 hours.
– If you do not use the humidifier for more than one day, pour out the unused water
from the tank and the internal parts of the humidifier.
I V. MAINTENANCE
Clean the surface of the appliance with a damp cloth. Rinse the vessel for aromatic additives
with warm water. Rinse the tank in warm soapy water. You may also use disinfectants but
always follow the instructions provided on the packaging. Clean the ultrasound converter
with a cloth (sponge) and warm soapy water. If you use the humidifier frequently, we
recommend cleaning the tank and the ultrasound converter at least once a week. Be aware
of the fact that a contaminated ultrasound converter will not function properly!
Never use any aggressive cleaning agents for cleaning the humidifier (such as petrol,
glass cleaner, furniture polish, or paint thinner) or any other solvents!
GB
18 / 31