
48
GB
/ 89
Note:
-
For heavy type dough, e.g. those of high content of rye flour, we recommend changing
of addition of the ingredients - first dried yeast, then flour and add water as the last
ingredient to ensure proper kneading. If you use delayed start function, the yeast must
not come in premature contact with water.
-
With programs 1, 2, 3, 4, 5, 7, 9, 10 the device is previously heated and then the
process of stirring and kneading begins. It is for this reason that the device does not
make any “noise” after turning it on.
-
If the bread is too light at the end of the baking program, use the
BAKING
program for
further browning. To do this, press the
START/STOP
button, then select 8–
BAKING
and
press the
START/STOP
button again.
-
When using the device, it makes a characteristic sound (click). This is absolutely normal
and is not a reason to take the device back.
End of the programmed stages
Open the lid after program end. Pull the holder to remove the baking form
C
, put it upside
down on a heat-resistant solid surface (e.g. cutting board). If the bread will not go out to the
board, move the kneading blades backward and forward until the bread is released. If the
kneading blades are stuck in the bread, use
E
to remove them easily. Then, let the bread
cold down. Use electric slicer or a special toothed blade knife for slicing the bread. Store
remaining bread in a plastic bag or a utensil. You can store the bread for up to three days
at room temperature. If longer storage of the bread is needed, wrap it in the plastic bag
or utensil and store it in a freezer. Store for max 10 days. Whereas the homemade bread
does not contain any preservatives, its shelf life is not generally longer than the same of
shop-purchased bread.
Note:
use suitable personal protective equipment (e.g. kitchen gloves) for handling the hot
baking pan, holder, blades etc. Do not use gross force on walls of the baking pan to
release finished bread!
VI. FREQUENTLY ASKED QUESTIONS RELATED TO BAKING
Bread stuck on the pan after baking
Let the bread cool down for about 10 minutes after baking and then turn the pan upside
down. If needed, move the kneading blade shafts forward and backward. Grease the pan
including the kneading blades for the next baking.
How to avoid holes in the bread due to the kneading blades?
You can remove the kneading blades with flour coated fingers before the last dough rising
phase. (See timing of the program phases and information on the display).
Dough rises over the pan edge
It happens especially when wheat flour with higher gluten content is used.
-
Reduce amount of flour and adapt other ingredients. Finished bread will be of sufficient
volume.
-
Spread a tablespoon of dissolved margarine on the dough.
Содержание 0149 Siesta
Страница 39: ...39 SK 89 ...
Страница 90: ......