eta 002399001, Инструкция по эксплуатации

Страница: 15 / 32

II. DESCRIPTION OF THE APPLIANCE AND ACCESSORIES (Fig. 1)
G – Blender
G1 – Container lid G3 – Removable stopper (measuring cup 40 ml)
G2 – Container support G4 – Glass container
CLICK
12
3
1
2
G1
G4
G2
G3
1
G
III. PREPARATION AND ASSEMBLY
Remove all packaging material, remove the accessory. Remove all adhesive foils, stickers
or paper from the appliance. We recommend washing the glass container before using it
for the first time. The knife section is treated with oil not harmful to health for technological
reasons. Therefore first fill in the container with warm water (max. 50 °C) with a small
amount of detergent. Then put the container on the food processor, set the maximum
rotational speed and run for 1 minute. Then rinse the container with clear water.
Assembly
Assemble the blender and attach it to the blender mount A10 according to Figures 1 a 2.
Insert the removable stopper G3 in the lid opening. Apply reverse sequence to disassemble
the unit and to remove it from the mount.
Recommendation
– When the appliance is in operation, it is only possible to add liquid ingredients
(e.g. water, milk, oil, etc.).
– The longer you process the food in the blender, the finer the mixture is.
– If you are going to process larger amount of food, divide it into batches not to overload
the motor unit of the multifunctional head.
– Cut tougher substances into small pieces, otherwise the knife will soon become blunt.
– If you are going to mix ice cubes, their size should not exceed 40x40x20 mm, otherwise
the knife becomes blunt or the motor unit is overloaded.
– Never fill the container with liquids producing foam (for example milk) up to „ MAX “ level
to prevent overspill. We recommend 1 litre at maximum.
– If you are not satisfied with the result, switch off the appliance, mix the ingredients with
the wiper, remove part of volume or add a little more liquid.
– Soak hard food (such as legumes, soybeans, etc.) in water before further processing.
i
GB
15 / 27