ETA Systems ETA-ECM20 Скачать руководство пользователя страница 20

 

– 20 – 

etasys.com

Specifications are subject to change without notice.

1601 Jack McKay Blvd. • Ennis, Texas 75119  U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

LiMiTEd WARRAnTY 

This limited warranty is provided to the ultimate end user (the “Purchaser”) of an ETA Systems (“ETA”) product (“the equipment”).  
ETA Warrants the Equipment against defects in materials and workmanship for a period of three (3) years on Power Distribution 
Products and one (1) year on all other products from the original date of purchase.  All output devices such as triac solid state relays, 
electromechanical relays, output power modules, etc., shall only be warranted for a period of sixty (60) days from the original date of 
purchase.  This Warranty is not transferable and applies to the original Purchaser only. 

The duration of this warranty is limited to claims made to ETA within the periods stated with respect to parts and labor from the date 
of purchase from ETA or our distributors.  The Purchaser must allow ETA, at ETA’s option, to inspect the Equipment on request and the 
Purchaser must reasonably cooperate with ETA to verify the warranty claim of the Purchaser.  During the warranty period, defective 
equipment will be replaced or repaired to the general condition as received, at the discretion of ETA.  All transportation is the  
responsibility of the Purchaser or owner.

This Warranty applies only to defects in materials and workmanship and does not cover failure or damage due to shipping loss or 
damage, abuse, misuse, mis-application, incorrect or varying power line voltages, lack of proper maintenance, natural disasters, Acts of 
God, or unauthorized modifications, repairs or any alteration done without the expressed written permission of ETA Systems.

ETA does not warrant the fitness of the Equipment for a particular purpose and does not make any warranty, express or implied, other 
than the warranty contained herein.  No implied warranty on this Equipment, created by state law, shall extend beyond the term of this 
warranty, and ETA shall not be liabel for any loss of use of the Equiment, or consequential damages, including damages to other parts of 
the installation in which the Equipment is a part.

This Warranty is in lieu of any and all other warranties, expressed and/or implied, including any implied warranty of merchantability.  No 
agent, representative, dealer or employee has the authority to increase or alter the liability, obligations, and terms of this warranty or sale 
of the Equipment.  This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.

NOTE: It is strongly recommended that any Equipment returned to ETA be properly packaged and insured for its full value in case of 
loss, handling, or shipping damage. ETA shall not be responsible for damage or loss of Equipment during shipping.  All equipment 
returned to ETA Systems for any reason must include a RETURN MATERIAL AUTHORIZATION (RMA) number on the outside of the 
shipping container. Equipment returned without an RMA number will be refused and returned to the sender.

 

SERVICE

Should your ETA-RACEWY6 require service, please contact the ETA Systems warranty department at  

1-877-689-8055, ext. 277 to obtain an RA number.

ETA Systems Tech Support can be reached at 1-800-321-6699.

Visit our web site at www.ETAsys.com to see other ETA Systems products.

©2009 ETA Systems  All rights reserved.   ETA003567 RevA 05/09

ETA-RACEWY6

Electrical Housing for ETA-ECM20/ETA-ECM20M

Содержание ETA-ECM20





















Отзывы: