Et system LAB-HP/E 10KW, Руководство пользователя

Страница: 28 / 41

Ext. Control: Computer
22 ET System electronic GmbH
Example:
#1,ID
#22,GTR
#ALL,GTL
The status word can be read with the command
<STB>
or
<*STB?>
. The following functions are assigned to the bits:
Bit Function
D15 Parity error
D14 Over run error
D13 Framing error
D12 Timeout error
D11 n/a
D10 n/a
D9 n/a
D8 n/a
D7 Parity enable
D6 Parity mode (1 = odd, 0 = even)
D5 Stop bit (1 = 2 Stop bits; 0 = 1 Stop bit)
D4 Data format (1 = 8 bit; 0 = 7 bit)
D3 n/a
D2

Table
D1

Table
D0

Table
Table: Error messages
D2 D1 D0 Error
0 0 1 Syntax
0 1 0 Command
0 1 1 Range
1 0 0 Unit
1 0 1 Hardware
1 1 0 Read
Interface parameters are configured via software using the command
<PCx>
. The settings can be saved with the
command
<SS>
.
Interface Reconfiguration
In case, the user has forgotten the active setup, there are two ways of reconfiguring the interface:

sending the command
<PCx>
from one of the other interfaces

using the display to configure the interface

Interface Parameters