GB
23
Alarm signal during operation
Red LED
Explanation
Solution
Intermittent alarm signal
Flashes approx. every 0.5 seconds
Radio module alarm triggered when input is set.
Silence the alarm signal for approx. 10 - 13 minutes.
Any networked radio modules/PROTECTOR KRF 9 V
devices will also be muted.
No signal
Flashes approx. every 0.5 seconds
Silenced when the alarm is triggered.
Silence the alarm signal for approx. 10 - 13 minutes.
Any networked radio modules/PROTECTOR KRF 9 V
devices will also be muted.
Short beep is emitted approx. every 30 seconds
Flashes approx. every 30 seconds and
coincides with the beep
Radio module's fault signal indicating a flat
battery.
Wait at least 20 minutes before replacing the
battery so as to avoid disrupting the radio
transmission.
Short double beep emitted approx. every 4 hours
Flashes twice approx. every 4 hours and
coincides with the beep
Fault signal received from a networked radio
module/PROTECTOR KRF 9 V device that has a
flat battery.
Wait at least 20 minutes before replacing the
battery of the device which initiated the signal
so as to avoid disrupting the radio transmission.
If the signal persists, all of the radio group's
radio modules/PROTECTOR KRF 9 V devices
will need to be reset to their factory settings and
reprogrammed.
No signal
Flashes approx. every 30 seconds
Ready for operation/standard mode/radio
module is operating correctly.
Alarm signal during programming
Red LED
Explanation
Solution
No signal
Flashes approx. once per second
The radio module is in programming mode. The
button has been pressed and held down for
approx. 2-3 seconds.
The radio module will automatically revert to
standard mode after approx. 1 minute.
No signal
Lights up for approx. 4-5 seconds
Programming has been successfully completed.
Press and hold down the button for a minimum of
approx. 5 seconds to restore factory settings.
A short beep is emitted when the button
is released
Flashes approx. every 0.5 seconds
The radio module reverts to the factory settings.
The button has been pressed and held down for a
minimum of approx. 5 seconds.
Once the button is released, the radio module
reverts to standard mode without radio
communication.
6 • TABLE OF FUNCTIONS
Содержание PROTECTOR RF 10
