OPERATING INSTRUCTIONS
PD-FLAT 360i/6 mini DALI
PD-C 360i/8 mini DALI
GB
12 / 20
Switch-off warning
Once the switch-off delay time has elapsed, there is a 60 second switch-off warning.
The light is dimmed to the orientation lighting level. If a movement is detected or a
button is pressed during this period, the detector returns to its previous state. If no
movement is detected during the 60 seconds, the detector returns to its original state.
Fully automatic mode
Depending on the preset light value, the light channel switches on automatically
when movement is detected. The light channel remains on for as long as movement
is detected and as long as the ambient light value does not exceed the preset light
value. If movement is no longer detected, the time settings for the respective channels
start. The channel can also be switched on and off or dimmed manually via a DALI
button (or the remote control).
Function
Customised setting
Enter programming mode
The detector goes into programming mode.
Acknowledgement:
The
blue LED
lights up permanently and the lighting is
switched on continuously.
Fully automatic / semi-automatic mode
The lighting can be controlled in fully automatic and semi-automatic modes.
Fully automatic:
The lighting is switched on depending on the set lux value
and movement being detected. If movement is no longer detected, the preset
switch-off delay time will start. The relevant active status can be optionally
overridden using the external “S” button.
Acknowledgement:
The
blue LED
flashes three times.
Exit programming mode
The set parameters are stored on the detector.
Acknowledgement:
The
blue LED
is switched off.
+
Dimming
Pressing the dimming button causes the detector to start dimming the
connected lighting. Once the lighting reaches the desired level, the value can
be determined using the “Eye button”.