OPERATING INSTRUCTIONS
7 / 17
GB
MD 360/8 Basic
MD 360i/24 Basic
MD 360/24 Basic SMB
MD 360i/8 Basic
MD 360/8 Basic SMB
MD 360i/24 Basic SMB
MD 360/24 Basic
MD 360i/8 Basic SMB
4.1
Masking the field of detection
Use the lens mask provided to mask out specific areas of detection.
5 Activation
Connect the power supply.
A warm-up phase of 25 seconds is initiated. The
red LED
flashes.
During this time, the lighting is switched on.
5.1
Overview of factory settings
Factory settings
Light value
approx. 100 lux
Switch-off delay time 5 min.
Sensitivity
100 %
The manual setting element values are active on delivery. The values can be
overridden at any time by programming the detector using one of the optional remote
controls.
