ESX Xenium XE4240-DSP, Руководство пользователя

Страница: 21 / 36

21
HIGH LEVEL
INPUT
E / F / G / H
LINE OUT
SPEAKER
OUTPUT
BATT.
+12V
GND
XE4240-DSP
4-CHANNEL AMPLIFIER WITH
DIGITAL SOUND PROCESSOR
POW.
PRT.
REMOTE
OPTICAL
INPUT
ON
ONLY WITH HIGH LEVEL INPUT
GND
WiFi BOX
HIGH LEVEL
INPUT
SPEAKER
OUTPUT
F+
F -
E+
E-
SPEAKER
OUTPUT
BATT.
+12V
G/H
LINE OUT
XE6440-DSP
6-CHANNEL AMPLIFIER WITH
DIGITAL SOUND PROCESSOR
POW.
PRT.
REMOTE
OPTICAL
INPUT PC CONNECT USB
AUX
INPUT
WiFi BOX
AUX
INPUT
REM
IN/OUT
REM IN/OUT
AUTO TURN ON
OFF
ON
ONLY WITH HIGH LEVEL INPUT
AUTO TURN ON
OFF
PC CONNECT USB
INSTALLATION INSTRUCTIONS
MECHANICAL INSTALLATION
Before you start with the installation of the sound system, disconnect necessarily the GROUND connection wire from the
battery to avoid any risk of electric shocks and short circuits.
Avoid any damages on the components of the vehicle like air bags, cables, board computer, seat belts, gas tank or the like.
Ensure that the chosen location provides a sufficient air circulation for the processor. Do not mount the device into small or sealed spaces
without air circulation near by heat dispersing parts or electrical parts of the vehicle.
Do not mount the processor on top of a subwoofer box or any other vibrating parts, whereby parts could loosen inside.
The wires and cables of power supply and the audio signal must be as short as possible to avoid any losses and interferences.
NOTE
1 4 x
4 x
4 x
4 x
3
2
4
At first you need to find a suitable installation location for
the processor. Ensure that enough space for the installa-
tion of the cables remains and that they will not bent and
have sufficient pull relief.
Drill
Marking
Pen or
peening
tool
Mounting
screw
Lay the processor aside and then drill the holes for the
mounting screws at the marked locations.
Please ensure not to damage any components of the ve-
hicle while you drilling the holes. Alternatively (depends
on the material of the surface) you can also use self-tap-
ping screws.
Keep the processor at the chosen mounting location in
the vehicle. Then mark the four drill holes with an appro-
priate pen or peening tool through the designated mount-
ing holes at the processor.
Then uphold the processor to the chosen position and
fix the screws through the mounting holes into the drilled
screw holes.
Ensure that the mounted processor is tightly fixed and
can not come loose while driving.