GSM+GPS CAR ALARM (Model F-900C) MANUAL
2
Functions and Features
１．
Anti-burglar, anti-robbery;
２．
An real-time inquiry about the position of your car is made through SMS of mobile phone.
３．
An independent inquiry about the detailed position of your car can be made.
４．
No monitor terminal and platform are required and it is free of service charge.
５．
Automatic SMS and alarm type can be provided when your car alarms.
６．
Car can be inspected and oil/power unlocking controlled through SMS.
７．
Adopting wireless data communication technology, with faster alarming response
and more stable performance t
han wire GSM car alarm;
８．
Remote calling;
９．
Disable vehicle through remote circuit/fuel line lock;
10
．
Good concealment, being installed any hidden place of vehicle and achieving the
wireless connection between main unit and the existing car alarm, working even if
the existing car alarm removed.
11
．
Gas supply cut /breaker connecting the main unit wirelessly so that the vehicle can
not be started once the circuit/ fuel line is locked, even the main unit of alarm is
dismantled
12
．
With hidden emergency alarm switch and gas supply/power cut switch;
13
．
Wire-cutting Prevention: It will call, send a short message to and give a voice prompt to the car owner
about power failure.
Anti-dead and anti-leakage-of-alarm design;
14
．
Remote monitoring
15
．
Password protection;
16
．
Arm/disarm by telephone;
17
．
Car position location by GSM network;
18
．
Small capacity, easy to install and use, cost-effective.
Product Components
One main unit, One gas supply cut/relay (one for back up), hidden emergency button,
one set of alarming sensor, one siren, one set of monitor, one set of power line for main
unit, one set of GSM antenna, one
set of GPS receiving heads
Operation
1. Main unit connection
Install the main unit according to the Installation Diagram.
2. Install SIM Card
First, you have to purchase one GSM mobile phone card (SIM card),
then screw out the
four bolts at the back of the main unit, open the face covering of main unit, put the SIM
card in the SIM card slot, turn on the power supply (at
“
ON
”
position), and system will
start to work within 5 -25 minutes. Finally put back four bolts into the main unit.
