13
CV
Name
Description
Range
Default
63
Sound volume
Master volume control for all sounds.
0 - 192
129
64
Brake sound threshold «Brake On»
If the actual loco speed step is smaller than or equals the value indicated here, the brake
sound is triggered.
0 - 255
44
65
Brake sound threshold «Brake Off»
If the actual loco speed step is smaller than the one indicated here (up to 255), the brake
sound will be switched off again. .
0 - 255
03
66
Forward Trim
Divided by 128 is the factor used to multiply the motor voltage when driving forward.
The value 0 deactivates the trim.
0 - 255
128
67-94 Speed table
Defines motor voltage for speed steps. The values „in between“ will be interpolated.
0 - 255
-
113
Power Fail Bypass
The time that the decoder bridges via the PowerPack after an interruption of voltage.
Unit: A multiple of 0.032768 sec. See section 6.12.2.
0 - 255
101
116
Slow speed BEMF Sampling period
Frequency of BEMF measurement in 0.1 milliseconds at speed step 1
50 - 200
35
117
Full speed BEMF Sampling period
Frequency of BEMF measurement in 0.1 milliseconds at speed step 255
50 - 200
150
118
Slow speed BEMF Measurement gap Min
Length of the BEMF measuring gap in 0.1 milliseconds at speed step 1
10 - 20
15
119
Full speed BEMF Measurement gap Max
Length of the BEMF measuring gap in 0.1 milliseconds at speed step 255
10 - 20
20
124
Extended Configuration #2
Additional important settings for LokSound Decoders
-
16
Bit
Description
Value
0
Bi-directional bit: Keep driving direction when changing direction.
Do not keep driving direction.
1
0
1
Disable decoder lock with CV 15 / 16
Enable decoder lock with CV 15 / 16
0
2
2
Disable prime mover startup delay
Enable prime mover startup delay
0
4
3
Disable serial protocol
Enable serial protocol
0
8
4
Enable Output AUX9 (LokSound 5 H0 only)
Enable Wheel Sensor input (LokSound 5 H0 only)
0
16
5
Motor Overload Protection
Motor is not switched off when blocked.
Motor is switched off for a few seconds when blocked to avoid
burnout
0
32
6
Disable Automatic parking Brake
Enable Automatic parking Brake (EMK Braking)
0
64
7
Reserved
128
125
Starting voltage Analog DC
0-255
70
126
Maximum speed Analog DC
0-255
120
Programming table - List of most important CVs
