Esu 50113, Руководство пользователя, Страница: 12 / 24

12
9.5. Starting App and selecting the command station
After the WLAN connection to the ECoS has been established successfully,
you may start the actual Mobile Control II control App. This is done by pres-
sing the MC II icon on the main screen.
First one must select the com-
mand station to which the
Mobile Control should be con-
nected. This cannot be done au-
tomatically, because there may
be several command stations in
a network. Therefore a list with
the available command stations
is displayed:
Select the command station to
which you want to establish a
connection. Normally only one
ECoS should be shown. For bet-
ter orientation the software ver-
sion as well as the IP address of
the command station are being
displayed in addition to the host
name of the command station
(also refer to chapter 8.1).
The App memorises which com-
mand station you have chosen.
During the next start, establi-
shing a link will give priority to
the most recently employed
command station. Should this
be unsuccessful, then the list of
all available command stations
will be displayed.
9.5.1. Demo mode
If there is no command station in the network, then you may select the demo
mode in the context menu. You can test the device with the aid of this demo
mode.
10. The main screen
Finally the main screen of the Mobil Control will be displayed. All main func-
tions are controlled from this screen.
a) Toggling between locomotive control and accessory control panels (signal-box)
b) “+” Adding locomotives or accessory control panels to the quick access list
c) “-“ Deleting locomotives or accessory control panels from the quick access list
d) Displaying the main menu
10.1. Main menu
Locomotives and consists Main Screen
a)
b)
c)
d)