Estia 06-11161, Руководство пользователя

Страница: 9 / 13

9
BEFORE USE
Remove any packages, disassemble any detachable parts. Clean the dough hooks and wire
beaters. Before assembling the mixer, make sure the power cord is unplugged from the power
outlet and the speed selector is at the “0” position.
USING THE MIXER
1.
Assemble proper wire beaters or dough hooks into mixer.
NOTE: wire beaters can be inserted in either socket, as the wire beaters are identical.
For dough hooks, the one with washer can only be inserted into the bigger socket and
the other one can only be inserted into smaller one. The two dough hooks can not be
inserted in reverse.
2.
Ensure that the unit is at the “0” setting, then plug in the power source.
3. Set the speed selector to your desired speed. There are 6 speed settings to be selected. When
kneading yeast dough, suggesting to select the speed selector by lower speed and then by
higher speed to achieve the best results. The mixer will run at the highest speed when pressing
turbo button .
Warning: Do not stick knife, metal spoons, fork and so on into bowl while operating.
4. The max operation time per time shall be less than 5 minutes. Minimum 20 minutes rest time
must be maintained between continuous two cycles.
Note: During operation you may rotate the bowl with hand to achieve the best results.
5. When mixing is complete, turn the speed selector to “0” setting, and unplug the cord from
power outlet.
6. If necessary, scraping the excess food particles from the wire beaters or dough hooks by
rubber or wooden spatula.
7. Hold the wire beaters or dough hooks with one hand and press the Ejector button firmly down
with the other hand to remove the beater or dough hooks.
NOTE:1). Remove the wire beaters or dough hooks only when the speed selector is at
the “0” setting.
2). During operation, you can put the mixer vertically, but make sure the speed
selector is at the “0” setting.