Esterline Souriau UTS LC Series, Руководство по сборке

Страница: 7 / 16

7
UTS1JC18LCN & UTS6JC18LCN
(Continued)
8. Before the instant adhesive begins to harden,quickly slide the ear clamp over the fi ber, orient the Clamp according the picture.
Push the strength members back over the clamp until it bottoms on the rear fl ange of the support.
7. Apply the instant adhesive on the fi ber and cover the crimp support. (e.g. Loctite 480 PRISM).
9. Crimp the both ear of the Clamp using the Nipper. Remove the kevlar strength members using using the shears.

Check the good crimping by pulling manually.
10. Strip the fi ber buffer according to your LC supplier recommendations and make sure to reach the fi nal desired lengths for the individual
fi bers as described on the pictures below.
Bare fi ber
Fiber buffer
UTS LC Series
|
BT304