Esterline Souriau UTS LC Series, Руководство по сборке

Страница: 4 / 16

4
UTS LC Series
|
BT304
The following tools and materials are necessary for preparation, assembly, inspection, and maintenance of the connector and cable assembly.
Follow the tool instruction for operation and safety guidelines.
Tools
• Cable jacket strip tool
• Aramid Fiber Shears
• Fiber Stripping Tool
• 15 mm U–wrench
• 28 mm U–wrench
• 36.5 mm U–wrench
• Nipper (Oeticker Standard pincers with
straight jaws 14100082)
• Heat gun (optional)
Material
• LC contact: the UTS LC connector range can
adapt all kind of LC contact as defi ned per
IEC
61754-20
• Cable: the UTS LC connector range can
adapt all type of standard cable from 3 to
6mm outer diameter.
• Above these diameter limits some
adaptations are necessary
• Suggested glue: LOCTITE ® 480 PRISM
Instant Adhesive
Assembly Instructions
The assembly should be done in a dust free
and dried environment, in accordance with
fi ber optics good practices.
Make sure that all components are free from
contamination.
The assembly instruction is only a guideline
and the assembly/manipulations are under the
responsibility of the assembler. Any change of
product or material is under the responsibility
of the assembler.
Tool & Material
Accessories
Sealing Caps
Part number
UTS618DCG2
Part number
UTS18DCG2
For UTS1JC18LCN & UTS718LCN
For UTS6JC18LCN
OR OR
WITH
Receptacle Plug
Connector type Backshell
Part number
Male insert Female insert
Free hanging receptacle Cable gland UTS1JC18LCN -
Plug Cable gland - UTS6JC18LCN
Jam nut receptacle Without UTS718LCN -
Connector Part Numbers