background image

6

po.org

MODEL: EST-MTB29  PRODUCT CODE: 704513  |  MODEL: EST-MTB29M  PRODUCT CODE: 704512    10/2021

AFTER SALES SUPPORT

info@tem

AUS

1300 112 534

General Safety Instructions (Cont.)

•  Usage restrictions: This mountain bike is not intended for use by persons 

(including children) with reduced physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they have been given supervision or 
instruction concerning the use of the appliance by a person responsible for their 
safety. 

•  Children: This mountain bike may be used by children aged 14 years or older. 

Children younger than 14 years should not play with the bike. Cleaning and 
maintenance should not be performed by children without adult supervision.  
Do not let children inflate tyres

.

Bike Essentials

•  Always double-check your bike before riding it: tighten the handlebars and 

stem, check the saddle, wheels and brakes, etc.
–  

Steering: Make certain that the stem is inserted into the head tube to at least 
the minimum insertion line. Check the clamp nut and stem bolt to make sure 
they are tightened securely.

–  

Seat: Check for tightness of the seat clamp and seat post clamp and that the 
minimum insertion line is inside the frame. See that the seat is at the proper 
height for the intended rider. Perform each check list below after all assembly 
instructions and any necessary adjustments have been completed. 

WARNING:

 Failure to perform these checks could result in serious injury to 

yourself and others.

–  

General inspection: See that all reflectors have been properly installed. 
Replace any missing or damaged reflectors. Check all fasteners and tighten if 
necessary.

•  Height adjustment: Adjust the seat height and handlebar height appropriately: 

the rider must be able to straddle the bicycle with at least 2.5 cm clearance 
above the horizontal bar when standing. Please refer to the assembly sections for 
details.

•  Tyre pressure: The tyre pressure range of this mountain bike is 40 psi, which is 

marked on the tyre. Please ensure that the tyre pressure is in this range to avoid 
accidents (1 psi = 6.895 kPa).

•  Check the tyre pressure: Check your tyre pressure before each ride by squeezing 

the tyre between your thumb and fingers. It should feel very firm, but not hard. 
When you sit on your bicycle, the tyre sidewalls should not compress very much 
under your body weight. Use a hand or foot pump to inflate your tyres. NEVER 
inflate your tyres with an air compressor at a petrol station.

Содержание EST-MTB29





















Отзывы: