10
AUS
AFTER SALES SUPPORT
1300 112 534
tempo.org/support
MODEL: EST-EFLDBIKE1 PRODUCT CODE: 710356 08/2022
Getting Started
Before First Use
• Unpack the electric folding bicycle
, making sure to remove all parts from the
packaging carton—check before you discard the carton. Remove all protective
packing materials. The carton staples may be sharp, take care that you do not
hurt yourself when reaching into the carton to remove parts.
• Packaging materials:
Keep the original packaging materials in a safe place.
It will help prevent any damage if the product needs to be transported in the
future, and you can use it to store the e-bike when it is not in use. In the event
that the carton is to be disposed of, please recycle it where possible.
•
CAUTION:
Unwrap all parts carefully!
If you are using a retractable utility knife
or scissors when unwrapping the parts, take care that you do not scratch the
metal parts of the bike or pierce the tyres. Remove the plastic covers from the
front wheel nuts, base of the fork and stem pillar.
Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging and protective materials are out of children's reach and
disposed of safely.
• Key removal:
The e-bike comes with two keys which are attached to the brake
cables. Please ensure you remove the keys and keep them in a safe place, a
key is required for locking the battery in place and unlocking it.
• Inspect
the cord and plug
of the battery charger for damage or wear before
each use. Do not use the charger if it is not working or if its cord is damaged. In
case of damage, please contact our after sales support centre.
• Read
all instructions
in this manual and make sure you understand all
warnings. To familiarise yourself with all the parts and operating principles
of the electric folding bicycle, please refer to the Product Overview and the
remaining sections in this manual. Also pay attention to the safety instructions
on the previous pages.
• Assembly requirements:
The
comes partially assembled (Fig. 1)
and requires full assembly by a
professional bicycle mechanic or
competent person, following the
instructions provided.
•
Tools required for assembly:
M6 Allen key and M13/15 wrench
(supplied) and a torque wrench set
(not supplied).
Fig. 1
