12
REMOTE CONTROL FUNCTIONS
MAIN POWER ON THE FIREPLACE CONTROL PANEL MUST BE IN THE ON
POSITION TO USE REMOTE CONTROL.
NOTICE
REMOTE CONTROL BUTTONS
FUNCTION
Press once
to turn
Power
ON.
Press again
to turn
Power OFF.
Press Heater Button once, 750W (LOW HEAT)
heater turns on and the fan starts to blow warm air.
Press Heater Button again
turns on
1,500W (HIGH
HEAT)
heater turns on and blows hot air.
Press Heat-
er Button again
and the heater turns
OFF.
The fan will
continue to blow to allow heater to cool down, and then
turns off.
NOTE: The Heat Enabling Switch (on the
back of the unit) must be ON for the Heater function
to operate.
Press Flame Button
to desired flame
color.
10 different color options
Press Flame (+/-) Button
to desired flame
brightness.
3 options. ONLY works when Flame button is ON.
Press Fuel Bed Button
to desired fuel bed color.
(10 different color options).
Press Fuel Bed (+/-) Button
to desired
brightness.
3 options. Only works
when
flame button is ON.
Press Timer (+/-) once
to
increase timer setting
by ½
hour increments. Maximum timer setting is 7½ hours.
Indicator light will illuminate.
Press Timer (+/-) button
again
to turn
off timer.
Press Flame Speed Button
to desired
flame speed.
5 options.
Press Back Light Button
to desired back light
color.
10 different color options.
Press Back Light (+/-) Button
to desired back light
brightness. 3 options. ONLY works when Back Light
button in ON.
+ -
+ -
+ -
To improve operation,
aim
the remote control at the front of the fireplace.
DO NOT
press the buttons too quickly.
Give the unit time to respond to each
command.
NOTICE
