6
STEP 4.
Align the holes in the wall bracket (E) with the pilot holes and drywall anchors. Thread
three wood screws (B) through the holes in the wall bracket and directly into the wall studs and
drywall anchor(s). Make sure the bracket is level. Tighten all screws securely with a screwdriver.
ALWAYS unplug this fireplace heater before assembly or cleaning, or before
relocating. Failure to do so could result in electric shock, fire, or personal injury.
NOTE: We recommend that two capable adult perform this procedure.
STEP 5A. With the help of a capable adult, lift the fireplace and align the two hooks on the back of
the fireplace with the slots on the wall bracket. Carefully set the hooks into the slots.
STEP 5B. Secure the fireplace to the wall bracket with two M4x8 metal screws (D), one on each
side. Thread the screws through the fireplace and into the wall bracket side tabs. Tighten both
screws with a Phillips screwdriver.
B
B
B
B
B
B
A
A
E
D
E
E
