4
Preparation
This product includes a GLASS! Always use extreme caution when handling glass.
Failure to do so could result in personal injury or property damage.
Remove all contents from the carton and place them on a clean, soft, dry surface. Check to make
sure nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible.
You will need the following tools (not included): Phillips screwdriver; stud finder; level; tape
measure; electric drill; 1/4” wood drill bit, 1/16” wood drill bit, and a hammer.
Wall Mount Installation and Assembly
Rear View of Fireplace
Step 1. Find a safe location.
Minimum clearance on each side:
19.7” (50 cm).
Minimum clearance below:
19.7” (50 cm). Wall mount only.
Minimum clearance above:
39.4” (100 cm).
Minimum clearance from the front
and sides: 3 feet (90 cm).
Choose a location near an outlet so
an extension cord is not required.
DO NOT position the unit directly
below a power outlet.
Parts and Hardware
A – Fireplace ( 1 )
B
– Wood Screws ( 3 )
C
– Drywall anchors ( 3 )
D – M4x8 Metal
Screws (2)
E – M6 x 14
Bolts (4)
RC
– Remote Control
F
–
Decorative River Rock
F –
Decorative Stones
F -
Decorative Faux Log Bed
F -
Decorative Glass
G
–
Feet (2)
H - Wall Bracket (1)
19.7”
(50 cm)
Minimum 39.4” (100 cm)
Minimum 19.7” (50 cm)
19.7”
(50 cm)
