8.
Cover landing gear retainer(B15) and fix with screws.
9.
Glue stabilizer and vertical fin to the fuselage with thick
CA.
(Horizontal tail must be paralleled with wing and
vertical fin must be at right angle to horizontal tail.
Wings must be installed temporarily to align them.)
Insert elevator pushrod to the horn and then glue hinges
with small amount of thin CA.
Insert rudder pushrod to the horn and then glue hinges with
small amount of thin CA.
10.
Install elevator and rudder servos.
11.
Install aileron servos and connect pushrods.
12.
Cut clear plastic windshield and glue.(refer to template on
the drawing). Cover side windows with clear film.
13.
Assemble dummy landing gear.
14.
Draw cutting line. (4mm above from the bottom)
15.
Cut wheelpants.
16.
Bond together with thin CA.
Page 9